This UL Approved 3 Pin US Power Cord is designed specifically for devices in North America and regions compatible with US-standard power systems (120V/60Hz). It offers three current ratings: 10A, 13A, and 15A, and is equipped with an IEC C13 standard connector. With "UL authoritative safety certification + multi-current adaptation + accurate US-standard compatibility + durable structure", it serves as an ideal power accessory for desktops, servers, printers, PDU power distribution units, and other devices, perfectly solving issues such as mismatched device current, incompatible interfaces, or safety compliance. It strictly complies with UL 62 and UL 943 safety standards and has passed multiple rigorous tests including insulation withstand voltage, temperature resistance, and overload protection. The UL certification mark ensures the product is used in compliance with regulations in North America, eliminating safety hazards such as electric leakage and short circuits, and is especially suitable for scenarios with high power supply safety requirements such as commercial offices and data centers.
The combination of the US 3-pin plug and IEC C13 connector offers strong adaptability: the input end is a standard NEMA 5-15P US 3-pin plug, with pins made of nickel-plated brass for strong oxidation resistance and smooth plugging. The grounding terminal can conduct the leakage current of the device to the ground, forming double safety protection, and is compatible with regular sockets in North American homes, offices, and data centers. The output end is an IEC C13 connector, which is compatible with most devices using this interface (such as desktop hosts, monitors, external hard drive arrays, and industrial control equipment). It plugs tightly and maintains stable contact, avoiding power interruptions or device failures caused by loose interfaces.
The 10A/13A/15A multi-current ratings meet the needs of different devices: the 10A rating is suitable for low-power devices (such as laptop power adapters and small printers) with a maximum power capacity of 1200W; the 13A rating is for medium-power devices (such as desktop hosts and 24-inch monitors) with a maximum power of 1560W; the 15A rating targets high-power devices (such as servers and PDU power distribution units) with a maximum power of 1800W. Users can choose accurately according to the rated current of the device to avoid overload risks.
Materials and detailed designs enhance durability and practicality: the cable conductor is made of 18AWG-14AWG high-purity oxygen-free copper (the higher the current rating, the thicker the wire diameter), which has high conductivity and minimal heat loss during current transmission, with no obvious heat on the cable surface after long-term use. The outer layer is covered with a flexible PVC sheath, which has the characteristics of temperature resistance (-20℃ to 70℃), wear resistance, and oil resistance, adapting to scenarios of frequent device movement or fixed wiring (such as office equipment adjustment and data center cabinet wiring). The default length of the cable is 1.5 meters (customizable from 1 to 3 meters), which balances the regular distance between devices and sockets, avoiding redundant or insufficient cable length. The surface is clearly printed with marks such as "UL LISTED", "120V", "current rating", and "IEC C13", facilitating quick identification of specifications and purposes for easier installation and maintenance. Whether enterprises configure power cables in bulk for office equipment, data centers match adaptive cables for servers, or home users replace power cords for desktops, this UL Approved US 3-Pin IEC C13 Power Cord can provide reliable power support with the advantages of "high safety + multi-adaptation + durability".
EN
